Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for Biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

With an increased demand for biomass based energy and with development of better technique harvest biomass, new possibilities open up. With the possibility to combine traditional cleaning of road?s right of way with Biomass harvesting, the work of suppressing tree vegetation could become profitable or at least decrease the road maintenance cost. However, knowledge about productivity and profitability in mechanical Biomass harvesting in roads? right of ways are still limited.

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

Hemp is an annual energy crop that fits very well in Swedish crop rotations. It is an interesting crop with many benefits, for example its ability to establish a large quantity of biomass in one year. Hemp is easy to grow and out-competes unwanted weeds through its aggressive growth pattern without the need for pesticides. Interest in growing hemp and other energy crops is currently decreasing, apparently because of high grain prices. These high prices give a higher net profit that we believe could partly cover the cost of hemp cultivation, while the hemp in turn would improve the crop rotation and thus repay its debts in the form of increased yields of other crops. The great disadvantage of hemp is the lack of knowledge about spring harvest of the crop.

Game fields are one way to divert animals away from sensitive areas, create shelter and forage, and also to increase the biological diversity. In this study I investigated how the plant composition in six different crop mixes used for game fields affected the biomass production, biomass consumption and biological diversity at the Koberg estate in southwestern Sweden. Six experimental fields were used and each field contained six plots, approximately 1500 m2 each, that was sown with a different crop mix. The crop mixes ranged from a pure grass mix (A), 70 % grass and 30 % leguminous plants (B), 53 % grass, 21 % leguminous plants and 26 % other herbs (C), 100 % leguminous plants (D) to the most complex mixes constituting of 91 % leguminous plants and 9 % other herbs (E) and 87 % leguminous plants and 13 % other herbs (F). The fields were cut weekly during the summer in 2010, to estimate weekly biomass production.

Trees of Bergvik apple (Bergviksäpple) planted between 2001 and 2007 have shown varying harvest. This study investigates why some trees gets low or no harvest while others get significantly higher harvest. The aim is to identify some reasons why fruiting differs between the trees and if possible suggest and/or enlighten the tree owners what can be done to improve fruiting. The study includes 25 trees, mostly located in Hälsingland, Sweden. The tree owners have answered two questionnaires, first in the spring with questions regarding flowering and the second in the autumn, regarding harvest.

Successful forest regeneration is a prerequisite for sustainable forest management. Therefore, it is important to prevent browsing damage on the commercially important tree species Scots pine. In this study I have tested a new alternative way to increase the available amount of forage and increase the use of these resources by especially moose. The method is based on a slash treatment at harvest, where the accessibility of slash as forage is increased during final felling or commercial thinning by gathering the slash and putting the Scots pine slash on top of the slash piles. This study has compared the availability of forage, the amount of browsed biomass and the number of fecal pellet groups between conventional and slash treated stands after final felling and commercial thinning in southern Sweden.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

During consultation procedures between forest owners and the Sámi, data on, e.g., reindeer lichen biomass on the current site is needed. Hitherto, the existing methods of measuring lichen cover and biomass has been either objective methods such as the Point Intercept method, which is time consuming, or some sort of subjective visual estimation, which is faster but less accurate. However, both these methods are sensitive to different observers and/or to different inventories. This paper addresses the further development and evaluation of a photographical inventory method that uses colour distribution in images to estimate lichen biomass. During the autumn of 2011 six different locations, with different grazing pressure and lichen cover, in Norrbotten county were inventoried using both the Point Intercept method and the photographical method, complemented with collection of biomass samples.

Storage of biomass is associated with problems like heat development, biomasslosses, and reduction of the fuel quality. Certain processes such as biological- andchemical degradation are responsible for these storage problems. This master?sthesis was carried out at Vattenfall Research and Development AB and is alignedtowards quantifying the biomass losses from short-term storage (1-2 months) ofbark and recovered wood. The biomass was stored in outdoor piles during differentseasons, campaign 1 (summer) and campaign 2 (autumn).

Stands where pre commercial thinning has been ignored or inadequate often tend to have high stem density and low average diameter when they reach heights of thinning. In such stands, it can often be expensive to do a conventional pulpwood harvest as a first thinning. This study investigates the development of the stands and the economic outcome of forest fuel extraction, or a combined harvest as alternatives to the ordinary pulpwood harvest. Simulations in Heureka StandWise were performed for two thin and dense stands, which were constructed by data from the Swedish National Forest Inventory. The simulations show that the extraction of forest fuel in first thinning at an early stage can provide higher net revenue compared to conventional pulpwood harvest at the same time or later.

In this literature review the characteristics of two free-floating macrophytes, water hyacinth   (Eichhornia crassipes) and duckweed (Lemna sp.), and two microalgae, Chlorella and Scenedesmus, have been examined regarding their suitability as efficient nutrient removers in the treatment of wastewater with high levels of nutrients and suspended solids from a biogas plant in Loudden. The needs required for the plants to be able to grow in wastewater and the amounts of biomass they can produce have also been studied. The results show that Chlorella is capable of a very high uptake of nutrients in photobioreactors with high nutrient loadings. With an ammonia uptake maximum value at 10900mg/m2/d Chlorella outshines the other organisms in this study. The test organism that performed the closest to Chlorella in terms of nitrogen uptake was water hyacinth with an uptake about 1602mg/m2/d.

Sammanfattning Ensilerat vallfoder är ett av de absolut viktigaste fodermedlen för att förmå korna att producera en stor mängd högkvalitativ mjölk. En hake är dock att ensilaget ska vara av god kvalitet och med bästa möjliga näringsvärde, samtidigt som man även vill ha volymmängder. För att få detta gäller det att skörda vid rätt tidpunkt, vilket kan vara svårt att veta när det infaller. Till detta finns ett hjälpmedel som kallas skördetidsprognos. Detta går ut på att man klipper prover i vallen upp till tre gånger innan första skörden för att analysera gräset och därigenom kunna avgöra när bästa tiden är för att skörda för att få den mest optimala kombinationen av mängd och näringsvärde. Syftet med detta arbete är att undersöka hur bra hjälpmedel jordbrukare i norra Sverige tycker att skördetidsprognosen är för att få en ökad kvalitet på ensilaget, samt att jämföra variationen i näringsvärde och mängd biomassa inom och mellan olika fält.

The aim of the study was to compare productivity in first thinning of birch stands, when either energy- or pulpwood was harvested. The systems total profitability was also compared by including forwarding and chipping costs. A Gremo 950 HPVR harvester was used and the same driver was used under the entire study. During the pulpwood harvest a Logmax 4000b harvester head was used and a feller buncher head made by Silvatec was used during the energy wood harvest. Six study unit pairs were located in a birch dominated stand outside Ängelholm in Skåne.